Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Hephaestus Stabilizer Weights

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area. 

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros