AXCEL SCOPE RECURVE CURVE RX PRO RHEOSTAT
Recurve Scope from Axcel.
Key features:
Packed with features for the best aim.
Wrapped fibre for increased brightness
Includes rheostat fibre for adjustable pin brightness and reduced starburst.
Can be used with or without a lens.
Features a 0x magnification, FITA legal, drilled lens for perfect fibre placement.
Includes a selection of apertures to frame your target best for you (square and 3/8", 7/16" and 1/2" round).
Fire-ring pin allows for quick change of fibre with no loss of accuracy.
Standard 8-32 thread size.
Ambidextrous design.
Range of colours available to match your style.
Fiber
0.019 ή 0.029
Colors in stock
Βlack
Compatible Apertures
8-32
Colors in order
Orange-purple-green-red
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
H&N Crow Magnum .22 Caliber
Medium weight, hunting pellet with flat trajectory for medium ranges. Maximum shock effect and deformation of pellets. Smooth with large hollow point.
Model
CROW MAGNUM
Τype
hollow point
Cal.
5,5 χιλ. (.22)
Head size
5,52 χιλ. (.2173)
Footsize [inches]
5,83 χιλ.(.2283)
Weight
1,18
Weight grains
18,21
10-Schot Grouping (inches) 25yds
1,259 "
Ballistic Soap Penetration (inches)
4,33 "
Ballistic Soap Εxpansion (inches)
0,59 ΄΄
B/C
0.012
Qty/box
200
Ideal field of use :
field target, paste control
Recommended type of weapon :
≥ 12 ft.lbs / 16 j
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
SHIBUYA SIGHT PIN
Shibuya Sight Pin
H&N Baracuda Hanter .177 Caliber
Heavy and extremely precise hunting pellet for longest distances. Advanced "Baracuda"- Design with superb aerodynamic characterstics, best punch and controlled energy- transfer. Tightest groups. Less lead-fouling and uniform groups due to special alloy and greasing. Smooth with deep hollow point.
.Model
BARACUDA HUNTER 4,50
.22
-
10-Schot Grouping (inches) 25/50yds
≥18.5 ft.lbs/ 25 j
Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
