BRUNOX LUBRI FOOD ® 50 ML

brunox® lubri-Food®
High – Tec – Allrounder for the food industry

Product description
Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).

Mode of working
A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.

Application area
All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.

Object
To reduce friction and wear and therefore increases the life span of expensive food production equipment.

Application
Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.

Apply a light, even film and allow BRUNOX® Lubri-Food® to react.
Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result.
Wipe off excess with cloth.
BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.

Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance	Transparent	Film Thickness	3 – 4 my
Specific Gravity	0,83 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	85 mPa s	Lubrication	Bruggertest/DIN 51347 25 N/mm2
Flashpoint	73 °C	Consistence of the film	film does non-hardening
Heat Resistance	up to 155 °C short time up to 125 °C permanent	Protection	-displaces humidity -stops limestone
Freezing Point	below -20 °C	Can be used	for all metals
pH-Value	neutral	Specifications	- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property	penetrating

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BRUNOX LUBRI FOOD ® 400 ML

brunox® lubri-Food®
High – Tec – Allrounder for the food industry

Product description
Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).

Mode of working
A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.

Application area
All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.

Object
To reduce friction and wear and therefore increases the life span of expensive food production equipment.

Application
Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.

Apply a light, even film and allow BRUNOX® Lubri-Food® to react.
Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result.
Wipe off excess with cloth.
BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.

Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance	Transparent	Film Thickness	3 – 4 my
Specific Gravity	0,83 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	85 mPa s	Lubrication	Bruggertest/DIN 51347 25 N/mm2
Flashpoint	73 °C	Consistence of the film	film does non-hardening
Heat Resistance	up to 155 °C short time up to 125 °C permanent	Protection	-displaces humidity -stops limestone
Freezing Point	below -20 °C	Can be used	for all metals
pH-Value	neutral	Specifications	- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property	penetrating

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N Baracuda 5.0

Heavy, extremely accurate pellet for long ranges. First-class aerodynamic design for high impact and penetration. Tightest shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy and lubrication. Specially chosen

Model	BARACUDA 5,00
Τype	domed
Cal.	5,00 χιλ. (0,20΄΄
Head size	0.20" / 5,00 χιλ.
Footsize [inches]	.210" / 5,33 χιλ.
Weight	0,86
Weight grains	13,27
10-Schot Grouping (inches) 25/50 yds	0.55" / 13,97 χιλ.
Ballistic Soap Penetration (inches)	9.252 " / 235 χιλ
B/C	0,027
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	12-37 ft.lbs/ 16 - 50 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Hills Mk2 & Mk3 Pump - Drypac Upgrade Kit

Hills Mk2 & Mk3 Stirrup Pump Drypac Kit. Retro Fit. ESSENTIAL Drypac kit for moisture and particle removal. Universal Fitting Kit Supplied. Full Instructions included. Please note that this unit will not fit other brands of pump. See description for full details.

The freight is 5,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N Spitzkugeln  airgun pellets  

Medium-weight, very accurate pellet for hunting and precision shooting at medium ranges.

Aerodynamic design for flat trajectories and high impact. Ribbed

Model	SPITZKUGELN
Τype	pointed ribbed
Cal.	5,00 χιλ. (.20)
Head size	..207"
Footsize [inches]	.2106"
Weight	0,71
Weight grains	10.96
10-Schot Grouping (inches) 25 yds 12ft.lbs	1,00΄΄
Ballistic Soap Penetration (inches) 25yds/18 ft.lbs	5,90΄΄
Ballistic Soap Expansion (inches)       25yds/18 ft.lbs	0,51΄΄
B/C	-
Qty/box	500
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥ 12 ft.lbs / 16j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6

BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

 C 40

It is as heavy as the real 1911 military hand gun. It is 99% metal except for the trigger and the hammer. The hammer is fully functional like in a real gun. It feels like you are holding a real gun! It is very powerful. It gets about 480 FPS with round BB's and 430fps with Pellets. It's an overall nice gun/replica. It's not the most accurate gun out there but the realistic look of it really makes up for that. It's very hard to tell it is an air gun, even the barrel is the size of a real bullet and the smaller barrel is hidden within it. It can shoot 8 shots off as fast as you can pull the trigger. Makes a nice sound, it is powered with c02. It is alot of fun and definitely the most realistic pistol I have found!

CROSMAN C 40 N
Caliber:	0.177" (4.5mm)	Scopeable:	-
Velocity:	430-475  fps	Grip:	Synthetic
Loudness:	Low	Suggested for:	Target practice
Barrel Length:	4.24”	Trigger Pull:	-
Overall Length:	8.6”	Action:	Double action
Capacity:	8	Safety:	Manual
Cocking Effort:	-.	Power Plant:	CO 2
Barrel:	Rifled 6/400	Weight:	2,5 lbs
Front Sights:	Fixed blade	Rear Sights:	Adjustable for windage and elevation
Energy ft.lbs	2.44	Joules	3.3
Guaranty	1 year	Service-spare parts	Yes

FOR MANUALHERE     FOR SPARE PARTS DRAW HERE

The freight is inclunding in the price for delivery in Greece.
You must be 18 years old to buy an airgun

The above item is already in stock in our shop.
Address :  61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.

CROSMAN C-TT

This Russian-style CO₂ BB pistol is a semi-automatic repeater. Styled after a World War II Russian service handgun, the heavyweight, metal framed pistol with polymer grip has a removeable 18-shot magazine, fixed-blade front sight and fixed notch rear sight.

FOR MANUAL PRESS HERE                                       FOR SPARE PARTS DRAW PRESS HERE

The freight is including in the price for delivery in Greece.
You must be 18 years old to buy an air gun

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.