Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BOHNING VANES ICE

Made from Bohning's Blazer material, known for its superior durability, an advantage for compound archers as vane keeps its shape even if it comes into contact with the target

Already coated with Bohning's primer, which is designed to react with glues for a super secure fit

Best fletched with an offset of 1 or 1.5 degrees for the best combination of grouping and clearnace

Best for use with a 100grn+ point and/or thin diameter heavy shafts such as Easton X10 Protour, Carbon Express Nano Pro and others like this.

Wide range of colours available.

The freight, for all the deliveries to the Greek area is 6,00 euros 

TAB CARTEL Pro III

Basic and inexpensive finger protection, PRO-III Finger Tab is double layer of  leather construction. It is great for entry level or young archers.

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

PANOPLY

PANOPLY 510

Three different Halberd, decorated shield.

Model	510
Code	510
Height	32 cm.
Weight	640 gr.

There is 6 euro freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

AAE ARIZONA VANES BULK EP-16

Made from super tough material with great durability.

Textured surface for better steerage and speed.

Vane base is pre treated with activator for improved and faster adhesion.

Wide range of bright and eye-catching colours.

The freight, for all the deliveries to the Greek area is 6,00 euros