KSL TAPE JIG
Pink machine for placing the KSL tapes triple fletching of the vanes.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,82 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
3 mPa s
Lubrication
Bruggertest DIN 51347 23 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
GROUP OF 6 INDEPENDENT HOUSES IN ARONIADIKA KYTHIRON
BUILDING D
Once you enter in Aroniadika village, you should continue for 500 meters and you will find, on your left-hand, the big church of “Metamorphosis Tou Sotiros”. At that point you should turn left and after 150m you will meet, at your right, the group of 6 residences, before the church of “Agios Charalampos”. Leave your car at the parking of 280 M2, follow the central path of the plot and you will find the 1st residence, the building Z, at your right hand.
Ιt is a two story-house built at the highest point of the plot with an amazing view. The ground-floor consists of a single-space used as kitchen, living room and dining room and a wc, which has a small storage place. In the first floor, there are 2 bedrooms, a small corridor and a bathroom. The residence is surrounded by a terrace. At the left of the home, there is the warehouse, which has a surface of 9 M2, leaned on the building through an arch.
The residence is surrounded by a “smooth” space of 210 M2 and is divided from the rest of the plot through a low wall built by stones.
BULDING
Z
Area
87,6 Μ2
Storage room
9 Μ2
Land use
about 260 Μ2
1st floor
2 bedrooms + bathroom
ground floor
kitchen, living room, dining room and a wc
heating-cooling
There are ready lines for air condition and central heating
Water supply
Local network
Electricity
phone network
Yes
Windows and doors
hardwood double glazed
Parking places
1+1
FOR FACADE BUILDING PLANS CLICKHERE FOR FLOOR BUILDINGS PLANS CLICK HERE
FOR MORE INFORMATIONS PLS CALL +30 6944 62 66 49
MEYER FLETCHER
With the new Meyer Fletching Jig Three at Once all three vanes can be fletched at the same time.
Significant differences to other products:
All lengths of vanes can be used
Supports all shaft diameters
The angle of the vane can be adjusted individually and repeatably set
CARTEL FLETCHER
Material
Metal
Dimensions
cm.
Weight
gr.
Color
Red
Type
Straight
StringFlex Classic Traditional Dacron
Available dimensions
48 “ 14 strand
50 “ 14 strand
58 “ 12 strand
64 “ 12 strand
64 “ 16 strand
BEITER TRI-LINER FOR SPIN-WINGS
The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter. With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.
DECUT FLETCHER P NEXUS
Solid Reliable Fletching Jig from Decut - Colour May Vary. Sometimes the clamp may be a different colour to the jig depending on stock.
Settings for 120° recurve or compound and 60° fletching angles
DECUT FLETCHING JIG P-NEXUS (112167)
Aloy
Black-blue-silver-red