BEITER WRENCH SET FOLDING

·         The Beiter Bow Wrench has been developed especially for archers by Werner Beiter together with the leading German Tool Company WIHA.

·         The base for the Beiter Bow Wrench is the unique WIHA Pocketstar, with its not common featuers.

·         The Beiter Bow Wrench includes 11 Hex Wrenches (8 inches, 3 metric) and one little screw driver. Due to the patented push out knob you can easily open the tool and take out the wrenches ONE AT A TIME!!!

·         The metric keys can be for example used for the Beiter Plunger or the Beiter Centralizer, but also for Shibuya Sights and many other products not produced in the US.

·          

The freight, for all the deliveries to the Greek area is 6,00 euros 

FCA Laser Alignment Tool

The Laser Aligner is designed to facilitate the setting up of your bow. This tools allos you to easily and accurately align limbs, center shot, stabilization, rest, riser, arrow, sights, wheels for recurve and compound bow. With this laser aligner you get a perfect alignment of all the system components bow, greatly reducing the time taken for tuning.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 10,00 euros 

BEITER WEIGHT

Beiter stainless steel weights. 1 oz. (5mm, ~28,35 grams) or 3 oz. (15mm, ~85 grams)

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area.

Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Adapters & Stainless steel front screw for Biter V-Box

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area. 

BIPODE SNIPERARCHERY

The Bipode is an option if you do not want to have installed the support that includes the 5.1 basic and pro kit on a table or wall, with the bipode you can mount your machine anywhere.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425 

 BOWPRESS SNIPERARCHERY

The 5.1 PRO has been designed to perform practically every adjustments that a bow may need. It is manufactured in metal and has a bearing incorporated to increase smoothness during use. The 5.1 BASIC has a 360 degree rotation axis that allows to work horizontally and vertically on the bow, being the latter very practical to be used as a bow support when tuning sight visors in general and when tuning 2nd and 3rd axis of sight visor in particular. The vertical position is also very practical to be used as an arrow rest.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425