BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

Avalon Tec One Target Quiver with Belt

Weight: 694 gr.

- Length: 46cm

- Direction: RH or LH

- Molded rubber arrow separator to prevent 'arrow wearing'

- 4 pockets

- Slot for pen & T-gauge

- 2 D-loop rings to hook your accessories

- Deluxe belt included

- Clip for accessories

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER PIN OUT NOCK X-10 145/1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

The freight, for all the deliveries to the Greek area is 6,00 euros 

Brass cleaning kit 4.5mm l in plastic envelope 130.04.5

Rifle cleaning kit with three-piece brass.

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BONDHUS allen WRENCH SET FOLDING

Set of imperial allen (inches) keys.

·         Includes key sizes commonly used by archery manufacturers.

·         Compact design ideal for keeping in a quiver.

The greatest advantage of a fold up is the convenience of range of blade sizes in one package. It’s also easily and conveniently carried in a pocket

The GorillaGrip® fold up handle is 40% stronger than steel, and will not rust or corrode

Patented handle design makes every job faster and easier

Handle is comfortable to hold, and does not conduct heat or cold

With the blade in the 180 degree position, a fold up can be used like a screwdriver

Blades open up to 270 degree from handle. Molded in stops then hold blades securely in place

With a blade in the 270 degree position, a fold up can be used for spinning a fastener in or out

Tool user can adjust tool tension

GorillaGrip® fold ups do not have ball end tips smaller than 5/32 and 4mm, since the handle could easily over-torque the blades and risk breakage