BRUNOX LUBRI FOOD ® 50 ML
brunox® lubri-Food® High – Tec – Allrounder for the food industry
Product description Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react. Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result. Wipe off excess with cloth. BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance
Transparent
Film Thickness
3 – 4 my
Specific Gravity
0,83 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
85 mPa s
Lubrication
Bruggertest/DIN 51347 25 N/mm2
Flashpoint
73 °C
Consistence of the film
film does non-hardening
Heat Resistance
up to 155 °C short time up to 125 °C permanent
Protection
-displaces humidity -stops limestone
Freezing Point
below -20 °C
Can be used
for all metals
pH-Value
neutral
Specifications
- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property
penetrating
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
1/8” BSP Bonded Seal Washers 5 pk
BENZAMIN CROSMAN LEGASY- B8M22
The Legacy 800 is a spring-piston breakbarrel rifle that sends pellets flying out the muzzle at 800 fps. And, because it's lightweight and has an easy cocking effort, it can be an all-day shooter.The hardwood Monte Carlo stock has laser-engraved checkering on the grip and a raised cheekpiece. Front and rear fiber optic sights (rear is adjustable for windage and elevation) let you acquire targets quickly. Not one to cut corners on this rifle, Crosman gave it a two-stage adjustable trigger, a built-in scope stope and a ventilated rubber recoil pad.The Legacy 1000 is ideal for plinking and target practice, but you can also take small rodents.
BENZAMIN CROSMAN LEGASY B8M22
Caliber:
0.22" (5.5mm)
Scopeable:
11mm dovetail
Velocity:
800 fps
Buttplate:
Rubber
Loudness:
4-Med. high
Suggested for:
Target practice/Paste control
Barrel Length:
18,25 “
Trigger Pull:
6.00 lbs
Overall Length:
43,00”
Action:
Break barrel
Capacity:
1
Safety:
Manual
Cocking Effort:
28,00 lbs.
Power Plant:
Spring-piston
Barrel:
Rifled
Weight:
4.38 lbs
Front Sights:
Fiber optic
Rear Sights:
Adjustable for wind age and elevation (fibre optic)
Guaranty
1 year
Service-spare parts
Yes
FOR MANUAL PRESS HERE FOR SPARE PARTS DRAW PRESS HERE
The freight is including in the price for delivery in Greece. You must be 18 years old to buy an air gun
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.
ACCUBOW BAND
Replacement band for AccuBow training aid.
Key features:
· Easy to replace and install.
· Durable and flexible.
· Allows for poundage adjustment from 10-70lbs.
· Replacement recommended every 4-6 months with regular use.
The freight, for all the deliveries to the Greek area is 6,00 euros
Spigarelli Release Easy Thumb Aluminium
Smooth action at a very good price. Thumb release for use with a D-loop.
SHOOTING CHRONY M -1
Gives Numbered Shot Velocities; + Velocity stays on display until you shoot again; + Uses 9 Volt Alkaline Battery with 48 hours of continuous use; + Stereo Jack for optional Remote Control or Chrony Ballistic Printer. The Chrony Ballistic Printer, will also function as a Remote Control. It prints velocities as you shoot and, on real paper. When done shooting, press STAT button on Printer and it will print Hi, Low and Average-velocities, Extreme Spread and Standard Deviation. !! This information becomes available only if and when the F-1 Chrony is used together with the Remote Control or the Chrony Ballistic Printer. !! + Upgrades to Alpha, Beta or Gamma Shooting Chrony or Master Chrony
Model
CHRONY M-1
Speed measurement
Feet per second
Max. number of shots / Measuring
32
Material
20 gauche steel
Dimensions (closd) (l x w x h)
19,05 cm x 11,45 cm x 7,00 cm
Weight
1.150 gr
Alkaline Battery
9 Volt
FOR MANUAL PRESS HERE
The freight is including in the price for delivery in Greece. The tripod is not including to the price