CARTEL FLETCHER

Cartel Fletcher is economically priced compact sized fletching jig to make your own tailor-made arrow. It is lightweight aluminum construction, featuring scale engraved for fletch placement and easily fits in bow case for storage. Available with straight clamp only. Fletching 3 or 4 Vanes.

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER NOCKS PIN ASYMMETRIC #2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

QUIK COUPLER PLUG

Add more fill probes to your starter kit, BEST Fittings QC02 Coupler or compatible Foster type coupling. Quality Stainless Steel. Compatable with all 1/8 BSP connectors. Complete with a bonded seal washer for easy fitting.

Model	02B3-ML
Material
Thread
Availability

The freight is 5,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

JVD Taper Tool Plastic

Taper tool for 5/16”

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

SHOOTING  CHRONY M -1

Gives Numbered Shot Velocities; + Velocity stays on display until you shoot again; + Uses 9 Volt Alkaline Battery with 48 hours of continuous use; + Stereo Jack for optional Remote Control or Chrony Ballistic Printer. The Chrony Ballistic Printer, will also function as a Remote Control. It prints velocities as you shoot and, on real paper. When done shooting, press STAT button on Printer and it will print Hi, Low and Average-velocities, Extreme Spread and Standard Deviation. !! This information becomes available only if and when the F-1 Chrony is used together with the Remote Control or the Chrony Ballistic Printer. !! + Upgrades to Alpha, Beta or Gamma Shooting Chrony or Master Chrony

FOR MANUAL PRESS HERE

The freight is including in the price for delivery in Greece.
The tripod is not including to the price

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425