STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 8¨ - 10¨-12¨

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Axcel Stabilizer Short CarboFlax Pro 650

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

DECUT PCOCUT

Mobile high precision and international reputation of the product for many years, good quality, after the materials are aluminum anodic oxidation on the laser carving.Is one of the classic DECUT products.There are difference between 110 v and 220 v respectively.The motor speed of 6000 rotations per minute (RPM).Can ensure the cutting surface is smooth, when cutting is suitable for carbon arrows, aluminum, etc.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 9,00 euros 

BEITER  IN-OUT  NOCK

The Beiter Hunter Nock was designed for Compound Archers with D-Loop. Hunter Nocks are "symmetric" because only with this shooting style release and nock are in one line, that means this is the only symmteric way to shoot in archery.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and - very important - the Beiter Nock guarantees constant release from the bowstring, shot after shot!

The Beiter Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it, having ideal gliding surfaces.

FOR MORE INFORMATIONS PLEASE PRESS HERE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

H&N Finale match 4.50 mm pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH RIFLE 4,50
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,50 χιλ.
Weight	0,53
Weight grains	8,18
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

Specifications* Test Rifle: Walther LG300 (7,5 J); distance 10m

Cal. .177 (4,5mm)	Muzzle	10m	30m
Velocity (m/s)	175	-	-
Kinetic Energy (J)	7,5	-	-
Ballistic Soap Penetration (mm)	-	-	-
Ballistic Soap Expansion (mm)	-	-	-
10-Shot Grouping (mm)	-	5,0	-
Pellet Weight (g)	0,53	-	-
Headsize (mm)	4,50	-	-
Footsize (mm) 4,75	4,75	-	-
B/C	0,010	-	-

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

H&N Finale match 4.49 mm pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH RIFLE 4,49
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,49 χιλ.
Weight	0,53
Weight grains	8,18
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

Specifications* Test Rifle: Walther LG300 (7,5 J); distance 10m

Cal. .177 (4,5mm)	Muzzle	10m	30m
Velocity (m/s)	175	-	-
Kinetic Energy (J)	7,5	-	-
Ballistic Soap Penetration (mm)	-	-	-
Ballistic Soap Expansion (mm)	-	-	-
10-Shot Grouping (mm)	-	5,0	-
Pellet Weight (g)	0,53	-	-
Headsize (mm)	4,49	-	-
Footsize (mm) 4,75	4,75	-	-
B/C	0,010	-	-

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Letter-opener F-3073

Letter-opener copy of  masonic sword.

Model	F-3073
Code	F-3073
Total length	25 cm.
Description	Bronze with elaborated handle and blue sheath of imitation of leather
Weight	96,5  gr.
Material	Zinc alloy

The freight for delivery inτο  Greece is 6 euro.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N Finale match 4.51 mm Pistol pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH PISTOL 4,51
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,51 χιλ.
Weight	0,49
Weight grains	7,56
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE