DECUT Arrow Cutter BOSCUT
Mobile high precision and international reputation of the product for many years, good quality, after the materials are aluminum anodic oxidation on the laser carving.Is one of the classic DECUT products.There are difference between 110 v and 220 v respectively.The motor speed of 6000 rotations per minute (RPM).Can ensure the cutting surface is smooth, when cutting is suitable for carbon arrows, aluminum, etc.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE
Field Target 6,35
Medium-weight, very accurate pellet with flat trajectory for medium ranges. Exceptional aerodynamic designfor high impact and penetration. Clean-cut bullet holesand tight shot groups. Ideal for target shooting and knock-down targets. Smooth with wadcutter rim.
Model
FIELD TARGET 6.35
Τype
domed
Cal.
6.35 mm. (.25)
Headsize
.0,2488 ¨/6.32 mm.
Footsize
.2606 " / 6,62 mm.
Weight
1,58
Weight grains
24,38
10-Schot Grouping 18ft.lbs/25yds
-
Ballistic Soap Penetration 33ft.lbs/25yds
Ballistic Soap Expansion 33ft.lbs/25yds
B/C
0,028
Qty/box
200
Ideal field of use :
field target, paste control
Recommended type of weapon :
≥ 12 ft.lbs/ 16 j
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE