BEITER PIN OUT NOCK X-10 145/2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

MARTO SHRASAYA 200

The sirasagia were swords battle but when a blade should be stored for long, then the ADAPT a wooden handle and sheath made ​​of natural wood nurizaya to be able to preserve moisture and time.
Handmade katana by Marto, in Toledo Spain steel type AISI 420. It made ​​the process of forging and heat. The blade does not rust and does not need further care. The casing is made of wood with Japanese symbols on the handle and the tray ...

Model	SHRASAYA 200
Code	200
Total length	38,5  ΄΄
Blade length	27.36 ΄΄
Handle length	9,8΄΄
Weight	2,42 lb
Material	Forged Steel AISI 420

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

SHOOTING  CHRONY PRINTER

Prints on plain paper, comes with 16 ft. interface cable and runs on 120V_AC Adapter, Output_6VDC (included) or 4-AA Batteries (not included). Can be placed anywhere on the Shooting Bench because it connects to the Chrony with a Cable (without needing light port alignments).

The SHOOTING CHRONY BALLISTIC PRINTER works with all Shooting Chrony Models and all Master Chrony Models, manufactured and sold since January 1, 2000, and, starting with Serial # 157288.

The following Chrony Models manufactured and sold prior to that date and Serial number also work with the CHRONY PRINTER: The Alpha, Beta and Gamma Shooting Chronys and the respective Master Chrony Models. Prints velocities as you shoot, and/or afterwards, when retrieving from memory. When done, push button, and Printer gives statistics, such as: LO, HI and Average velocity, Extreme Spread and Standard Deviation. Attach to target or file. It is a document. Printer also functions as a Remote Control . Weight: 1 lbs.; 4" x 7.5" x 1.75" high. 

Model	CHRONY PRINTER
Dimensions (closd) (l x w x h)	4” x 7,5’’ x 1,75’’
Weight	1 lbs
Alkaline Battery	6 Volt  (4 AAA) or transformer

FOR MANUAL PRESS HERE

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

CARBON SHAFT AVALON TEC ONE

The straightness tolerance on the Avalon TEC ONE is the best in its price range in todays market. Its slim design prevents any wind drag on the outdoor field, making it an excellent arrow that will push your boundaries and take your scores to the next level.

-Full carbon shaft with straightness tolerance of ± .001"
- Pin insert included