SHOOTING CHRONY M -1
Gives Numbered Shot Velocities; + Velocity stays on display until you shoot again; + Uses 9 Volt Alkaline Battery with 48 hours of continuous use; + Stereo Jack for optional Remote Control or Chrony Ballistic Printer. The Chrony Ballistic Printer, will also function as a Remote Control. It prints velocities as you shoot and, on real paper. When done shooting, press STAT button on Printer and it will print Hi, Low and Average-velocities, Extreme Spread and Standard Deviation. !! This information becomes available only if and when the F-1 Chrony is used together with the Remote Control or the Chrony Ballistic Printer. !! + Upgrades to Alpha, Beta or Gamma Shooting Chrony or Master Chrony
Model
CHRONY M-1
Speed measurement
Feet per second
Max. number of shots / Measuring
32
Material
20 gauche steel
Dimensions (closd) (l x w x h)
19,05 cm x 11,45 cm x 7,00 cm
Weight
1.150 gr
Alkaline Battery
9 Volt
FOR MANUAL PRESS HERE
The freight is including in the price for delivery in Greece. The tripod is not including to the price
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Baracuda Hunter Extreme
Heavy, exceptionally accurate hunting pellet for long ranges. Deep, crossshaped hollow tip for tremendous shock effect and rapid energy transfer. Best aerodynamic properties for high accuracy. Smooth.
BARACUDA HUNTER EXTREME
Τype
Hollow point
Cal.
4,5 χιλ. (.177)
Head size
.177
Footsize [inches]
-
0,60
Weight grains
9,26
10-Schot Grouping (inches) 25/50 yds
Ballistic Soap Penetration (inches)
B/C
Qty/box
400
Ideal field of use :
field target, paste control ≥ 50yds
Recommended type of weapon :
≥12.lbs/ 16 j
The above item will be in stock in our shop after 15/9/2012 Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
EZ-POELANG ARCHERY FIBERGLASS FOR BEGINNERS
EZ-POELANG FIBERGLASS FOR BEGINNERS
SIZE
Ø
mm
SHAFT WEIGHT
Grains/inch
SPINE
LENGTH
inch
WEIGHT OF POINTS
grains
NOCK
Over nock mm/grains
6.9 MM
6,9
28
30
If you buy more than 20 items, the freight is free for deliveries into the Greek area.