Beiter V-Box
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors. Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
. How does the Beiter V-BOX system work? The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.
Where should, or can, the weight be attached? Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.
Damper Beiter V BOX
Material
elastic
Dimensions
1,38 ΄΄ (5/16-24)
Weight
49 gr.
Color
Βlack
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
SF V-BAR 45° AXIOM
V-BAR SF AXIOM 45°
Anodised aluminum
7,5 x 2,5 cm
93,50gr.
Opening angle
45°
ARCTEC CROSSTUBE STABILIZER LONG
Features Arctec Crosstube stabilizers:
· Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness
· Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.
· Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)
· Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)
· Very low susceptibility to wind by only 16mm diameter – independent of wind direction
· Easy fine-tuning made possible through stainless steel or aluminium weights
· The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)
· Packaging doubles as a protective cover (transparent tube)
· Handmade in Germany (Solingen)
Specifications:
· Small-diameter three carbon layer using cross development technology rod with only 16mm diameter.
· Weight: 140 grams at 32" (without weights and damper) - the stiffest rod with this small diameter on the market - 1/4" Arctec modular damping system - stainless steel weight (35 gram) and end weight (45 gram) included.
· Optional aluminium weights with 15 grams available.
Available lengths:
· Extender in 3", 4" and 5"
· Side-rod in: 8", 10", 12" and 14"
· Long-rod in: 28", 30", 32", 34" and 36"
Carbon
28 ",30", 32 ", 34" and 36 "
Weight total
140 gr/32 ΄΄
Outsid diam.
16 mm
SPECIAL ORDER
BEITER WEIGHT
Beiter stainless steel weights. 1 oz. (5mm, ~28,35 grams) or 3 oz. (15mm, ~85 grams)
Beiter Weights
Stainless steel
Weight g / oz
28,35 / 1
85,05 / 3
Diameter
320 mm..
Diameter hall
1/4"-20 & 5/16”
Colors
Silver
The freight is 6,00€, for all the deliveries into the Greek area.
DECUT FLETCHER P NEXUS
Solid Reliable Fletching Jig from Decut - Colour May Vary. Sometimes the clamp may be a different colour to the jig depending on stock.
Settings for 120° recurve or compound and 60° fletching angles
DECUT FLETCHING JIG P-NEXUS (112167)
Aloy
cm.
gr.
Black-blue-silver-red
Type
Straight
DENIX 1231 L
Austrian blunderbuss, 18th. Century
Model
BLUNDERBUSS
Code
1231 L
700 gr.
Dimension
39 cm
Grey & old brass
Handle
Wood
Date of manufactoring
18th century
AVAILABILITY
YES
The freight is including to the price for delivery inτο Greece.