|
|
DIN Charging Kit + 600mm Ultima Hose Upgrade
DIN Charging Head With 600mm Ultima Hose Upgrade. Suitable for any DIN cylinder up to 300 Bar. 1/8"BSP hose is compatible with most air rifle fill probes and couplings including, Air Arms, BSA, Daystate, Falcon, Logun, Webley etc.
Model
|
DIN Charging Kit + 600mm Ultima Hose Upgrade
|
Pressure Gauges
|
Yes
|
Tube length
|
60 cm
|
edge
|
1/8¨
|
Availability
|
Yes
|
The freight is 5,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
100,31EUR
|
|
|
|
BB-BATTERY PACK 12V FOR LED LIGHT CHRONY
|
A BB-BATTERY PACK
A BB- Battery Pack is also available to power this Chrony LED Lamp (C.L.L.) in the countryside or where there is no 120V/220V power.
BB-Battery Special Features:
• Can power the C.L.L. more than 18 hours continuous use
• 2.3Amp-Hour, 12V rechargeable battery. It can be recharged from the cigarette lighter socket of the vehicle, or from any 120/220-Volt AC wall outlet
• The Red LED indicates the charger is plugged in. The GREEN LED indicates a full charge of the battery
• Automatic overcharge protector
• Use as a 12-Volt emergency power source for most 12-Volt appliances that are equipped with a center-pin-positive cigarette lighter plug such as games, cell phone charger, palmtop computers, flashlights, heated clothing etc.a set of 16” Wire-Rods. 120V/220VAC adapter included (12VDC output @500mA).
Model
|
LED SHOOTING LIGHT FIXTURE
|
Input
|
220 / 12 V
|
Output
|
12 V
|
Dimensions
|
18 x 3,6 x 7 cm
|
Weight
|
1005 gr
|
Length of cable
|
30 cm
|
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
100,31EUR
|
|
|
|
SIGHT 5D GR
|
Sight 5D series
Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)
|
|
50,00EUR
|
|
|
|
ΒRUΝΟΧ® GUN CARE SPREY 300 ML
|
BRUNOX Gun Care ® can 300 ml
for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).
•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.
•Prevents from leak currents as contact spray.
The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
|
BRUNOX® Turbo-Liquide with TURBOLINE –
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
Specific Gravity
|
0,81 ± 0,03 g/cm3
|
Expect Coverage
|
approx. 100 – 110 m2/l
|
Viscosity (20oC)
|
3,6 mPa s
|
Lubrication
|
Bruggertest DIN 51347
22 N/mm2
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
Freezing Point
|
-54 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,06EUR
|
|
|
|