H&N Finale match 4.51 mm Pistol pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH PISTOL 4,51
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,51 χιλ.
Weight	0,49
Weight grains	7,56
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

BEITER NOCKS PIN ASYMMETRIC #2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

GROUP OF 6 INDEPENDENT HOUSES IN ARONIADIKA KYTHIRON

BUILDING E

Once you enter in Aroniadika village, you should continue for 500 meters and you will find, on your left-hand, the big church of “Metamorphosis Tou Sotiros”. At that point you should turn left and after 150m you will meet, at your right, the group of 6 residences, before the church of “Agios Charalampos”. Leave your car at the parking of 280 M2, follow the central path of the plot and you will find the 1st  residence, the building Z, at your right hand.

Ιt is a two story-house built at the highest point of the plot with an amazing view. The ground-floor consists of a single-space used as kitchen, living room and dining room and a wc, which has a small storage place. In the first floor, there are 2 bedrooms, a small corridor and a bathroom. The residence is surrounded by a terrace. At the left of the home, there is the warehouse, which has a surface of  9 M2, leaned on the building through an arch.

The residence is surrounded by a “smooth” space of 200 M2 and is divided from the rest of the plot through a low wall built by stones. 

BULDING	Z
Area	87,6 Μ2
Storage room	9 Μ2
Land use	about 220 Μ2
1st floor	2 bedrooms + bathroom
ground floor	kitchen, living room, dining room and a wc
heating-cooling	There are ready lines for air condition and central heating
Water supply	Local network
Electricity	Local network
phone network	Yes
Windows and doors	hardwood double glazed
Parking places	1+1

FOR FACADE BUILDING PLANS CLICKHERE                FOR FLOOR BUILDINGS PLANS CLICK HERE

FOR MORE INFORMATIONS PLS CALL +30 6944 62 66 49

PRO POINTS FOR ALUMINIUM SHAFTS

Pro Points Original are made of high-quality, solid, hardened steel to exacting standards in the popular bullet style. Available for most competition arrow shafts in multiple grain weights, Pro Points Original deliver consistent and customized results for the most demanding archers.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

SPIN WING VANES

Original Spin Wing Vanes feature a curved pocket design that traps and compresses air to rotate the arrow twice as fast as the average vane. The high-spin rotation improves arrow flight for tighter groups, even in changing wind conditions. The thin curved design has minimal drag.

The freight, for all the deliveries to the Greek area is 6,00 euros 

BACKPACK AVALON  “TYRO “

- Dimensions: 72cm H x 33cm W x 14cm D

- Removable three compartment riser and limb case

- Quick top access to riser and limb case

- Arrow cannister incl.

- Easy access oversized pocket with multiple compartments for accessories

- Hideaway backpack straps

- Up to 25" riser length

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 10,00 euros