Adapters & Stainless steel front screw for Biter V-Box

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area. 

Barracuda power

Heavy, exceptionally accurate pellet for long ranges. No lead-fouling, improved drive in barrel, no contact with lead thanks to special copper coating (20% harder than comparable lead pellets). First-class aerodynamic design for high impact and penetration. Low deformation of pellet. Tight shot groups. Smooth.

Model	BARACUDA POWER
Τype	domed
Cal.	4,5 χιλ. (.177)
Head size	.177
Footsize [inches]	.187
Weight	0,68
Weight grains	10,19
10-Schot Grouping (inches) 25/50 yds	0.59" / 1.023 "
Ballistic Soap Penetration (inches)	7.67
B/C	0.02
Qty/box	300
Ideal field of use :	field target, paste control
Recommended type of weapon :	12-37 ft.lbs/ 16 - 50 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

HOYT HANDLE XCEED GP 2020

Formula fitting recurve riser from Hoyt. 

The most dynamic and responsive feeling riser from Hoyt to date.

Key features:

• Riser design keeps flexing minimumal for increased accuracy and stability.
• Micro-adjustable dovetail adjustment block and tiller bolts to find your tuning sweet spot.
• Dynamic balance with more of the weight towards the pocket side of the riser for improved accuracy and consistency.
• Unique feel and performance.
• Featuring the classic Earl Hoyt geometry - a favourite for over 30 years.. 
• ILF fitting limbs .
• Modular stainless steel weight system (available separately) allows for extra weight to be added to the riser, giving the feel and stability you want. Fits cleanly into riser cut-outs for a seamless look. See related items below.
• VertaTune clicker plate allowing for tuneable pressure button height and a secure pressure button position.
• Available in a full range of Hoyt's anodized target colours.  

String Tension Technology settings: There are three distinct settings you can choose from. With the limb rockers in position number one, referred to as the Ultimate Performance Setting, you will achieve the highest level of string tension, which is optimal for those looking for a more aggressive pull through the clicker in high pressure, high adrenaline situations. On the opposite adjustment spectrum, position number three, referred to as the Ultimate Smoothness Setting, the string tension is the lowest. This helps the limbs feel smoother through the clicker, especially during the last 1 to 2 millimeters of the draw cycle. Position number 2 is considered a hybrid setting, for those looking for a combination of performance and smoothness.

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

SAUNDERS NOCK POINT

The Worlds Leading Nocking Device! The world's most popular arrow-to-string indexing device. Light weight, rounded brass with protective inner liner keeps arrow-to-string position. Red for 16-18 strand. WT - 7.4 grains Black for  12-14 strand. WT - 5.4 grains

The freight, for all the deliveries to the Greek area is 6,00 euros