Brunox® turbo-spray® 100ml

5 function - spray with Turboline

Application
for
• maintenance •cleaning • repair works
• production • storage • transportation

of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds

BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).

Application and effect

Lubricant

BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.

Creep oil / Rust loosener

BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.

Anti-corrosion

BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.

Cleaning agent

BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.

Contact spray

BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.

properties

BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC

Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,82 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	3 mPa s	Lubrication	Bruggertest DIN 51347 23 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-51 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BROADHEADS NAP SHOCKWAVE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Axcel Stabilizer Short CarboFlax Pro 500

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

KNIFE AND BROADHEAD SHARPENER BLAZE ORANGE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

DENIX 1007/L  Colt army mod. 1860

The Colt army mod. 1860 .44 caliber, was constructed in 1860 by the Colt's Manufacturing Company, about 200.00 in parts and was in production until 1873. Designed by Samuel Colt and was used in the Civil War and the war with the Indians. It was a side weapon used by the cavalry, infantry and naval forces. They used the same frame as the Colt Navy 1851, were .36 caliber but open their chamber at .44. Was 6-bullets, single action and used rotating cylinder 0.454'' (11chil.). Entered the cylinder 30 grains of black powder and the copper percussion cap contained mercury to cause the explosion. The rear sight was a notch in the hammer, clearly visible only when the revolver was cocked  The accurate was 70-90 meters and muzzle velosity was  900 feet per second.

Model	COLT Army model 1860
Code	1007/L
Weight	1.120 gr.
Dimension	37 cm
Color	Black and old brass
Handle	Wood
Date of manufactoring	1860
AVAILABILITY	YES

The freight is including to the price  for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425