Brunox ® LUB & COR

High-Tec Maintenanceproduct

Application and effect

We are glad to present you our newest product BRUNOX® LUB & COR.

BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.

Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.

When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable.
BRUNOX® LUB & COR made it possible to protect the firearm over years.

Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day.
BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.

BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden.
Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.

BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.

RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 100ml .

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

SIGHT SHIBUYA 485-9 CARBON  ULTIMA  ΙΙ   

     Proven podium topping technology.

·         Updated and improved redesign of the long time favourite the Shibuya Ultima.

·         Lightweight design with improved weight distribution.

·         Secure and simple to use sight pin locking. Redesigned for improved hold and to prevent thread damage.

·         Drive shaft dampening for a quieter shot and reduced vibration.

·         High grip adjustment knobs for easy adjustment in all conditions.

·         Windage fine adjustment scale for precision adjustment.

·         Secure and simple lever locking mechanism.

The freight, for all the deliveries to the Greek area is 6,00 euros 

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

The freight, for all the deliveries to the Greek area is 6,00 euros 

Model	Greek copis
Code	DA 518
Length	60 cm – 23,5΄΄
Description	Stainless steel with bronze handle
Weight	3,5 lbs
Length of bade	45,70 cm – 18΄΄
Length of handle	14 cm. – 5,5΄΄
Handle	Faux ivory with wire chain wrap
Material	Forged Steel

SWORD OF FILM ¨ALEXANDER THE GREAT¨

MARTO katana 328

Handmade katana by Marto, in Toledo Spain steel type AISI 440. Marto Katanas have forged and fully tempered stainless steel blades that have been polished and detailed. The blade does not rust and does not need further care. The casing is made of aluminum, lacquered.

Model	KATANA 328
Code	328
Total length	40,0  ΄΄
Blade length	27,3 ΄΄
Handle length	13,7΄΄
Weight	3,16 lb
Material	Forged Steel AISI 440

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

HANGERS

HANGER 11/G

Grey gun hanger ΄΄Lis Flower΄΄.

Model	11/G
Code	11/G
Height	9 cm.
Weight	170 gr.

There is 6 euro freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BEITER PIN OUT NOCK X-10 145/2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros