ARIZONA NOCK - PLASTINOCK

AAE's Plastinock's have a double snap design that gives a positive string fit that allows the arrow to leave the bowstring smoothly.

Longer ears and angled throat design keeps the nock on the bowstring at any string angle.  A thin base gives the nock a perfect blend to the arrow shaft.

Available in: 1/4", 9/32", 5/16" or 11/32"

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Spead loader kit for 1077-NS1200

Pre-load these three 12-shot clips for virtually uninterrupted shooting with the Crosman 1077..

code	0413
description	Set of 3 clips for 1077-NS1200
capacity	12 shot
material	plastic
qty	1 set
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Magazine A111-A112

The freight is 6,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

JUNIOR CARTEL ARM GUARD

Junior Armguard is 6.5” long and mode of solid polyester PVC coated fabric material. 2 internal rib supports on top and bottom and comes with 2x elastic straps with Velcro fastening.

The freight, for all the deliveries to the Greek area is 6,00 euros 

Pistols Spare Clip

3 spare clips for the 1088, 1008,C40, CK92  and T4 series of pistols. Holds BBs or Pellets.

code	0488
description	Set of 3 clips for 1008 – 1088 – Τ4 – C40 – CK92
capacity	8 shot
material	plastic
qty	1 set
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros