BEITER NOCKS PIN ASYMMETRIC #1
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN NOCK
Weight
4.32 gr
Colors
Green, Orange, White, black, blue, purple
Package
1 piece
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE
Easton Points Zinc Target One-Piece Apollo
Points Zinc Target One-Apollo
length
37.80 /50.75 mm
length of nose
14.61 / 15.96 mm
weight
75/100 grains.
thickness axis
4,09 / 4.11 mm
colors
silver
package
SWORD Marto 584 Templar Knights.
Towards the end of the First Crusade, founded the Order of the Knights Templar (1118 AD), in order to prevent the newly established Kingdom of Jerusalem from the Muslims and the free access of European pilgrims to Holy Land. A copy of the sword of the Knights Templar built the famous sword maker, MARTO. The sword consists of a silver plated handle, with gold inlays and various Templar symbols. The blade is forged steel 440 AISI with Templar symbols engraved on the blade.
Model
KNIGHT TEMPLARS
Code
584
Total length
47,24 ΄΄
Blade length
37,00΄΄
Handle length
8,66΄΄
Open cross
9,00¨
7lb oz
Material
Forged Steel 440
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
DENIX 1037
This French flintlock rifle, from 1806, saw service in the American battlefield as well as the European battlefields of the Napoleonic wars.
FRENCH RIFLE
1037
1.850 gr.
Dimension
113 cm
Color
Grey & bronze
Stock
Wood
Date of manufactoring
1806
AVAILABILITY
YES
The freight is including to the price for delivery inτο Greece.
BEITER TRI-LINER FOR SPIN-WINGS
The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter. With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.
Caliber .30 M1 WINCHESTER II W.W.
M1 .30
Price
200,00
1120/C
2.140gr.
90 cm
Black & wood
II W.W.
The freight is inclunding in the price for delivery in Greece.
Spares Lenses SHOOT OFF Classic
The freight is 6,00€, for all the deliveries into the Greek area.