Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

Field Target 6,35

Medium-weight, very accurate pellet with flat trajectory for medium ranges. Exceptional aerodynamic designfor high impact and penetration. Clean-cut bullet holesand tight shot groups. Ideal for target shooting and knock-down targets. Smooth with wadcutter rim.

Model	FIELD TARGET 6.35
Τype	domed
Cal.	6.35 mm. (.25)
Headsize	.0,2488 ¨/6.32 mm.
Footsize	.2606 " / 6,62 mm.
Weight	1,58
Weight grains	24,38
10-Schot Grouping 18ft.lbs/25yds	-
Ballistic Soap Penetration 33ft.lbs/25yds	-
Ballistic Soap Expansion 33ft.lbs/25yds	-
B/C	0,028
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥ 12 ft.lbs/ 16 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

JVD NETTING WHITE STANDARD

• The height of the netting is 3.20m.
• The netting is available in fixed dimensions as shown below (no increments possible).
• The netting is supplied with steel cable and rings.
• The Standard netting weighs +/- 300 gr./m2 (compared to +/- 500 gr./m2 of the Extra Strong netting and +/- 1,000 gr./m2 of the Ultra Strong one).

Upon request, with 20% prepayment

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge. 

Gas Pro Hold Tape For Spin Vanes

The freight, for all the deliveries to the Greek area is 6,00 euros 

Katana 9101 of period EDO (16^th century).

Model	9101
Code	9101
Total length	90 cm.
Length of blade	64 cm
Length of handle	23 cm
Description	Black with bronze tsoumba and traditional knitting on the handle.
Weight	1150 gram.
Material	Zinc alloy

 There is not freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425