Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE
Rose City Cedars shafts – 5/16” , 32"
Highest quality shafts from Rose City. Hand selected for best grain structure. These spine matched shafts come in a full 32" length in 2 different diameters, in a large range of sizes. Port Orford Cedar has been the prefered wood type for decades by traditional archers of all levels. It is unmatched by any other wood shaft because of its strength, straight grain, elasticity and perfect physical weight to spine ratio.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Τhe freight is 6.00 euro for deliveries into the Greek area.
HOYT LIMBS ILF/GP CARBON VELOS 2019
Grand Prix fitting recurve limbs from Hoyt.
Key features:
HOYT LIMBS ilf CARBON VELOS 2019
Material
Bamboo / Carbon
Size
66 – 68 – 70 ”
Power
22 – 50 lbs/ 2 lbs
Colors
Carbon
HANGERS
HANGER 10/NQ
Nickel samurai hanger.
Model
10/NQ
Code
Height
7 cm.
Weight
150 gr.
There is 6 euro freight for delivery inτο Greece.
HOYT LIMBS FORMULA CARBON INTEGRA
Formula fitting recurve limbs from Hoyt.
Designed by top recurve engineers and shooters, Carbon Integra limbs feature a new slimmer design for better performance and increased arrow velocity. This new design is a full 2 fps faster than the Carbon 840 limb and even smoother to draw. Made with pride in the U.S.A., Carbon Integra limbs are built from high quality hard rock maple, carbon and glass in a ISO 9001 certified factory. Available in Formula and Grand Prix, in short, medium and long lengths, and draw weights from 22 to 50 pounds in 2 pound increments.
