TAS Pine shafts - 5/16, 32"

TAS Cedars shafts - 5/16,   32"

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Τhe freight is 6.00 euro for deliveries into the Greek area.

Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

ΚΟΛΛΑ ΓΙΑ ΦΤΕΡΑ & NOCK  BOHNING

Κατάλληλη για φτερά, nock, pins και inserts

Κατάλληλη για όλους τους άξονες

Στεγνώνει σε 2 λεπτά και έχει πλήρη αποτελέσματα σε 4 ώρες.

Σωληνάριο 3 γραμμαρίων

Τα είδη είναι διαθέσιμα και στο κατάστημα μας,

Στουρνάρη 61 Αθήνα 104 32.
 Τηλ. 210 5225 007 - 210 5234 425

Η παραγγελία σας επιβαρύνεται με έξοδα μεταφοράς 6,00 ευρώ για παραγγελίες εντός της Ελληνικής επικράτειας. 

 KSL TRIPLE FLETCHING TAPE x10

Pre-cut lining tapes with scale printed to secure to apply the same length for each arrow. Regular width for front,  narrow width for back.  They are included 10 x 2 pieces in each package. Made for the KSL TAPE JIG.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

FIVICS BOWSTRINGER SG-12

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER PIN OUT NOCK X-10 145/1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

EASTON NOCKS SUPER 3D

• Fits FullBore and Fatboy aluminum shafts with Super UNI Bushings

• Colors: black, green, orange and white

The freight, for all the deliveries to the Greek area is 6,00 euros 

Brunox ® LUB & COR

High-Tec Maintenanceproduct

Application and effect

We are glad to present you our newest product BRUNOX® LUB & COR.

BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.

Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.

When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable.
BRUNOX® LUB & COR made it possible to protect the firearm over years.

Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day.
BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.

BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden.
Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.

BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.

RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 125ml High-Tec-Sprayer. The spray-can works without propellant. It will be delivered in multilingual (DE/FR/NL/IT/GB) alum cans. Each box contains 12 cans.

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425