MARTO katana 221
Handmade katana by Marto, in Toledo Spain steel type AISI 440. Marto Katanas have forged and fully tempered stainless steel blades that have been polished and detailed. The blade does not rust and does not need further care. The casing is made of aluminum, lacquered.
Model
KATANA 221
Code
221
Total length
40,0 ΄΄
Blade length
27,3 ΄΄
Handle length
13,7΄΄
Weight
3,16 lb
Material
Forged Steel AISI 440
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,82 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
3 mPa s
Lubrication
Bruggertest DIN 51347 23 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
EZ-POELANG ARCHERY FIBERGLASS FOR BEGINNERS
EZ-POELANG FIBERGLASS FOR BEGINNERS
SIZE
Ø
mm
SHAFT WEIGHT
Grains/inch
SPINE
LENGTH
inch
WEIGHT OF POINTS
grains
NOCK
Over nock mm/grains
6.9 MM
6,9
28
30
If you buy more than 20 items, the freight is free for deliveries into the Greek area.
BOWSTAND AVALON COMPOUND
This is pocket sized spring loaded folding plastic kick stand for any compound bow. Bow rests on POD and long stabilizer, keeps CAM out of dirt.
AVALON STAND
Plastic
Dimensions H
22 cm.
100 gr.
Color
Red
Type
Pocket
The freight, for all the deliveries to the Greek area is 6,00 euros
MP - 41
The MP-41 (M.P. 41) submachine gun (9x19 Luger/Parabellum) was developed by Hugo Schmeisser, son of the Louis Schmeisser who developed the first practical machine gun, the MP-18.At the time of development of MP-41, that is, in 1941, the company C.G.Haenel,at which Schmeisser was chiefdesigner, manufactured MP-40 submachine guns for German army. It is possible that Schmeisser decided to develop a submachine gun which was better suited for infantry use than the MP-40.For this reason, he combined the receiver, action and magazine of MP-40 with the wooden stock and selective-fire mechanism of MP-28.Haenel company produced more than few MP-41 submachine guns, which were mostly purchased by SS troops, which had their own supply chains. However, late in 1941 Erma company filed a patent infringement lawsuit against Haenel, and as a result, Haenel company was forced to close the production of MP-41. Only 26 700 guns of MP-41 pattern were made during the war, and most were issued to SS, SDand police troops.
1024
3.150 gr.
Dimension
86 cm
Black metal with wooden stock
Date of manufactoring
1941
30 WOOL CYLINDER 410 CAL
Wool cylinders, for the perfect cleaning and polish of the barrel, adjustable to according to of the pressure, with which it is screwed on the adapter.
Hephaestus Stabilizer Weights
Hephaestus Weights
bronze
Weight g / oz
28,35 / 1
Diameter
300 mm..
Thread
1/4"-20 & 5/16”
Packing
weight and o-ring
Colors
Gold – black – pink – purple – red – green - blue
The freight is 6,00€, for all the deliveries into the Greek area.
FOXGIL
LVGI 001
Price
126,00
Special washing-out treatment.